THINGS TO KNOW ABOUT VACUUM EXCAVATION
The world of construction is a risky one. Those who decide to go into this field for jobs should be aware of all the dangers they are vulnerable to before they immerse in it. Construction workers undergo many hazardous experiences as they work hard to make our surroundings easier and more convenient to live in. They are responsible for the smooth running of all infrastructure including electricity, water and gas. Sewer systems also fall into this category and are another important component of the network. All equipment that is on a construction site needs to be maintained and monitored with the utmost vigilance and necessary precautions need to be met. One of the most important things when considering digging up a site is to ensure you do not cause any damage to existing units; vacuum excavation is for this very purpose
Vacuum excavation is welcomed by the construction world with enthusiasm due to its myriad of benefits. It makes their jobs a whole lot easier, not to mention safer and is convenient to operate as well. For instance, if you were to consider construction on a site, aside from other technicalities as a construction company you will need to also check for safety underground. A maze of pipes, gas lines, electrical wiring and so on are all running across each other, and if you were to accidentally break one of them considerable damage will be incurred. This method enables you to map their whereabouts and dig accordingly.
HOW IT WORKS
Although it sounds rather foreboding, it is actually a very simple technique that is used very popularly in construction. If you need to find out whether a particular spot has any connections underground you would need to obviously tunnel underground, however as it is a dangerous job many construction workers are at risk. With this method of excavation, there are no such threats. How it works is, high pressure jets or air or water are blasted to remove soil and other debris that would otherwise be difficult to remove. This exposes the contraptions underneath enabling a clear insight. The residue is then sucked into a vacuum usually in a truck. If you are interested you can visit this wesite http://www.vac-it.com.au/service_locations.html for underground service locators.
RISKS AT CONSTRUCTION SITES
If you work in or own a construction company in any form, you will know all too well the hazards that are met by staff on a daily basis. These accidents can either cause very serious injuries that can disable you for life or even death. Some of these accidents include falling from heights, malfunctioning operating equipment, electrical shocks and so on. In the same way if you dig without looking, you could get caved in which is why vacuum excavation in Brisbane has been received with open arms in the field.
Did you know that of all the techniques that are used in locating underground utilities in the construction field, vacuuming is considered to be the only 100% safe option? That is because no crew is required to go inside the trench and everything can be operated above ground. Since the air or water exposes what is below the soil on their own, there is no need to physically look for drainage pipes and electrical wiring. When looking for providers, conduct some research to analyse your options.
Categorised as: Construction & Building